CPI Wise Rank Bvm08-From Gtu info(sorted)

NO.	Name	CPI	Enrollment No.
1	PITHAPUR MOHAMMED SHABBIR	8.68	80070109039
2	KOTHARI MADHUMITH UMESH	8.27	80070109014
3	KSHATRIYA ANKITSINGH OMPRAKASHSINGH	8.1	80070109015
4	MAHAJAN SURABHI ASHOK	7.98	80070109017
5	GANDHI BHAVIK ASHOKKUMAR	7.89	80070109007
6	PARIKH HARDIK MUKUNDCHANDRA	7.63	80070109028
7	ATODARIA KAUSHALSINH MAHENDRASINH	7.61	80070109001
8	RATHOD SACHINKUMAR PRAVINSINH	7.53	80070109046
9	VINAYKUMAR DWIVEDI	7.51	80070109006
10	DHEDHI RAKESH SHAMBHUBHAI	7.5	80070109005
11	KALPESHKUMAR NAKUM	7.47	80070109303
12	KHODIYAR PRATIK JAYPRAKASH	7.46	80070109013
13	GANDHI JUNED FEROJ	7.41	80070109008
14	PATEL DIXITKUMAR PRABHUBHAI	7.33	80070109032
15	JOSHI MAHARSHI NARENDRAKUMAR	7.29	80070109010
16	SHETH MRUNAL GOPALCHANDRA	7.21	80070109056
17	VYAS HARDIK DATTUPRASAD	7.2	80070109064
18	JAVIYA ANKITKUMAR KISHORBHAI	7.19	80070109009
19	SOLANKI MALDEBHAI UGABHAI	7.1	80070109058
20	KANANI RAKESH BAVACHANDBHAI	7.05	80070109011
21	SHARMA UMANGKUMAR DINESHKUMAR	7.04	80070109055
22	DESAI MEHULKUMAR VINODRAI	7.03	80070109004
23	SHAH HARSHIL RAKESH	6.95	80070109051
24	VADALIYA RAJESH LAKHAMANBHAI	6.91	80070109061
25	VORA SOUMIL SAMIRBHAI	6.83	80070109063
26	PATEL AKASH JAGDISHCHANDRA	6.77	80070109031
27	MAHANT BRIJESHKUMAR MRUGENDRABHAI	6.65	80070109018
28	MEHTA VAIBHAV RAMESHKUMAR	6.65	80070109021
29	SHAH PURVI BALMUKUND	6.62	80070109054
30	PARTH SANGHVI	6.61	80070109050
31	SHAH NISIT ANILKUMAR	6.59	80070109053
32	PADMANI KETAN DAMJIBHAI	6.57	80070109026
33	PRASAD PANKAJ PARAG HARENDRA	6.57	80070109041
34	SHAH NIDHI KAMLESHKUMAR	6.55	80070109052
35	SOLANKI DISHA VIJAYKUMAR	6.53	80070109057
36	PATEL JAY VIJAYKUMAR	6.4	80070109034
37	JAYDEEP JITENDRA	6.36	80070109302
38	PATEL MALVIKKUMAR KANUBHAI	6.35	80070109035
39	TANK SEMEL RATILAL	6.33	80070109059
40	MISTRI MEHULKUMAR NAVINBHAI	6.29	80070109023
41	RAVALIYA RAJESHKUMAR JETSIBHAI	6.28	80070109049
42	MANANI HITESH TULSIDAS	6.27	80070109020
43	PANCHAL ASHWINKUMAR BHOGILAL	6.25	80070109027
44	LATHIYA AKASHBHAI NARAYANBHAI	6.24	80070109016
45	MISHRA ROHIT INDRAJIT	6.16	80070109022
46	NAKUM SUMITKUMAR VITTHALBHAI	6.14	80070109025
47	OZA NEHAL	6.09	80070109305
48	TARKHALA AKASHKUMAR DEVABHAI	6.07	80070109060
49	ZALA NAVALKUMAR JAYANTIBHAI	6	90073109001
50	RAJANI JAYESH NITINBHAI	5.98	80070109042
51	BODARA MANOJ DHANJIBHAI	5.97	80070109003
52	PARMAR HARSHITKUMAR RATILAL	5.97	80070109030
53	GHEVARIYA HITESHBHAI JAGDISHBH	5.86	90073109002
54	PATEL HASMUKHRAY RASIKLAL	5.84	80070109033
55	PATEL MEHUL RAMESH	5.82	80070109037
56	KANJARIYA ANAND RAVJIBHAI	5.75	80070109012
57	MODI NEVIL RAJENDRAKUMAR	5.57	80070109024
58	MISTRY JAYESHKUMAR MANHARBHAI	5.51	90073109004
59	GAMIT UMESHKUMAR BHAGUBHAI	5.28	90073109006
60	RANA JAINIL GOPALBHAI	5.14	80070109043
61	PRAJAPATI NIRANTBAHEN GOPALBHAI	5.13	80070109040
62	VASAVA KIRANBHAI RUPSINGBHAI	5.09	80070109062
63	MAHIDA MITESH GALJIBHAI	5.08	80070109019
64	SHAH HARSHKUMAR NARENDRAKUMAR	4.76	90073109003
65	RATHAVA MAYURKUMAR CHHATRASINH	4.72	80070109045
66	RATHVA MUKESHBHAI BHIMSING	4.7	80070109047
67	PARMAR BIPINKUMAR JIVABHAI	4.5	90073109005
68	PARMAR DEEPAKKUMAR RAMANBHAI	4.13	80070109029
69	PATEL MANISHKUMAR SUDHIRBHAI	4.01	80070109036
70	BAGADA VIJAYKUMAR MANUBHAI	2.66	80070109002
71	RATHWA DINESHCHANDRA BACHUBHAI	2.36	80070109048
72	KAMLI KOMAL KANTILAL	2.1	80070109304
73	PATEL TARUNBHAI RAMABHAI	1.3	80070109038
74	RANA MAYURBHAI SURESHBHAI	0.89	80070109044

Advanced Power Electronics- I (Department Elective-I)

GUJARAT TECHNOLOGICAL UNIVERSITY
ELECTRICAL ENGINEERING
B. E. SEMESTER: VII
Subject Name: Advanced Power Electronics- I (Department Elective-I)
Subject Code: 170906

1. Resonant Pulse Inverters :
Introduction, Classification, Series resonant, Parallel resonant inverter, Class E
resonant inverter/rectifier, Zero current / Zero voltage resonant converter,
Comparison between ZCS and ZVS, Two quadrant ZVS converter, Resonant dc
link inverters, Inverters for UPS.
08
2. Multi-level converters:
Bridge inverters, Need for multi-level inverters, Concept of multi-level,
Topologies for multi-level: Diode Clamped, Flying capacitor and Cascaded multilevel
configurations; Features and relative comparison of these configurations;
Switching device currents; DC-link capacitor voltage balancing, features of multilevel
converters, Applications.
08
3. Multi-pulse converters
Concept of multi-pulse, Types of multi-pulse converters, different transformer
connections for multi-pulse converters, Applications of multi pulse converters.
06
4. Power Supplies:
Dc Power Supplies: Switched-Mode DC Power Supplies, Fly back converter,
Forward converter, Push pull converter, Half bridge converter, full bridge
converter, resonant DC power supplies, Bidirectional power supplies.
Ac Power Supplies: Switch Mode AC Power supplies, Resonant AC Power
supplies, Bidirectional AC Power supplies
10
Text Books:
1. Power electronics By M D Singh and K B Khanchandani by TMH publication
2nd edition.
2. “Power Electronics - circuits, devices and applications”, Prentice Hall of India,
2nd ed., 2000- Muhammad H. Rashid.
Reference Books:
1. Power Electronics – Devices, Converters and Applications”, by Vedam
Subramanyam Revised 2nd edition, New Age Publications.
2. Power Electronics By P. S. Bimbhra, Khanna Publications.
3. Power Electronics, Converters, Applications and Design- Ned Mohan,
Undeland and Robbins, Second Edition, John Wiley Publications.
4. Power Electronics- M. S. Jamil Asghar, PHI Learning Pvt. Ltd.
5. Power Electronics by V.R.Moorthi, Oxferd University press.
6. Thyristorised controller by Dubey Joshi & Doralda, New age Publication.
7. Power Electronics & Variable Frequency drive, B.K.Bose IEEE press
8. Modern Power Electronics ”, S. Chand and Co. Ltd., New Delhi, 2000- P.C.Sen
UPS: on line, off line, line interactive, chargers, inverters, transfer switch,
transformer, control, design etc.,
5. Electronically commutated motors:
Brushless DC Drives :Introduction, Sinusoidal and Trapezoidal type, Electronic
Commutator, control of Brushless DC Drives, Current Control, , Switching
Circuits, Applications
Switched reluctance motor drive: Construction, working, types, energy
conversion
Stepper motor drives.
10

Advanced Power System-I (Department Elective-I)

GUJARAT TECHNOLOGICAL UNIVERSITY
ELECTRICAL ENGINEERING
B. E. SEMESTER: VII
Subject Name: Advanced Power System-I (Department Elective-I)
Subject Code: 170905

1. Introduction:
1.1 Background
1.2 Electrical Transmission Networks
1.3 Conventional Control Mechanisms
1.3.1 Automatic Generation Control (AGC)
1.3.2 Excitation Control
1.3.3 Transformer Tap-Changer Control
1.3.4 Phase Shifting Transformers
1.4 Flexible ac Transmission Systems (FACTS)
1.4.1 Advances in power Electronics Switching Devices
1.4.2 Principles and Applications of Semiconductor Switches
1.5 Emerging Transmission Networks
06
2. Reactive Power Control in Electrical Power Transmission Systems
2.1 Reactive Power
2.2 Uncompensated Transmission Lines
2.2.1 A simple Case
2.2.2 Lossless Distributed Parameter Lines
2.3 Passive Compensation
2.3.1 Shunt Compensation
2.3.2 Series Compensation
2.3.3 Effect on power-Transfer Capacity
2.3.3.1 Series Compensation
2.3.3.2 Shunt Compensation
06
3. Principles of Conventional Reactive Power Compensators
3.1 Introduction
3.2 Synchronous Condensors
3.2.1 Configuration
3.2.2 Applications
3.3 The saturated Reactor
3.4 Thyristor Controlled Reactor(TCR)
3.4.1 The single phase TCR
3.4.2 The three phase TCR
3.4.4 The segmented TCR
3.4.5 The 12-Pulse TCR
3.4.6 Operating Characteristics of a TCR
3.4.6.1 Operating Characteristics Without Voltage Control
3.4.6.2 Operating Characteristics With Voltage Control
3.5 The Fixed Capacitor Thyristor Controlled Reactor (FC-TCR)
3.5.1 Configuration
3.5.2 Operating Characteristic
3.6 The Mechanically Switched Capacitor-Thyristor-Controlled Reactor(MSCTCR)
3.7 The Thyristor-Switched Capacitor (TSC)
3.7.1 Switching a Capacitor to a Voltage Source
3.7.2 Switching a Series Connection of a Capacitor and Reactor
3.7.3 Turning Off of the TSC Valve
3.7.4 The TSC Configuration
3.7.5 Operating Characteristic
3.8 The Thyristor-Switched Capacitor-Thyristor-Controlled Reactor(TSC-TCR)
3.8.1 Configuration
3.8.2 Operating Charateristics
3.8.3 Current Characteristic
3.8.4 Susceptance Characteristics
3.8.5 Mismatched TSC-TCR
3.9 Comparison of different SVCs
10
4. HVDC Transmission-Development
4.1 Introduction
4.2 Historical Development
4.3 Equipment required for HVDC System
4.4 Comparison of AC and DC transmission
4.5 Limitation of HVDC Transmission Lines
4.6 Reliability of HVDC Systems
4.7 Standard Rated Voltages of HVDC and EHV AC systems
4.8 Choice of EHV AC and UHV AC lines and substation
4.9 Comparison of HVDC link with EHV AC link
4.10 HVDC-VSC Transmission System
6
5.
HVDC Convertors
5.1 Introduction
5.2 Insulated Gate Bipolar Transistor (IGBT)
5.3 HVDC Convertor Valve and Valve Assembly
5.4 HVDC –VSC Operation and Principles
5.5 Three Phase Six Pulse Converter using SCRs
5.6 Twelve Pulse Bridge Converters
04
6. Six Pulse Converter Operation and Analysis
6.1 Introduction
6.2 Conduction Sequence in Six Pulse Converter
6.3 Ideal Commutation Process without Gate control
6.4 DC output Voltage
6.5 Gate control of valve
6.6 Analysis of Voltage Waveform with overlap angle
6.7 Voltage dropped in PU Quantities
6.8 Complete Characteristics Of converter as Rectifier /Inverter
6.9 Analysis of Twelve Pulse Converter
6.10 Power flow in HVDC Link
6.11 Operation and Analysis Of VSC converters
06
7.
Control of HVDC converter and system
7.1 Introduction
7.2 Mechanism of AC power Transmission
7.3 Principles of Control
7.4 Necessity of Control in case of DC link
7.5 Rectifier Control
7.6 Compounding Of Rectifier
7.7 Power Reversal in DC link
7.8 Voltage Dependent Current Order Limit- Characteristics of Converter
7.9 System Control Hierarchy and Basic Philosophy
7.10 Inverter Extinction Angle Control (EAG)
06
8. Harmonics in HVDC Systems
8.1 Introduction
8.2 Importance of Harmonic Study
8.3 Generation of Harmonics by Converters
8.4 Characteristics Harmonics on the DC Side
8.5 Characteristics Current Harmonics
04
Text Books:
1. Thyristor-Based FACTS Controllers for Electrical Transmission Systems-
R.M.Mathur/ R.K.Verma, John Wiley & Sons, Inc., 2002
2. Power System Stability and Control – Prabha Kundur, Mc Graw Hill, ISBN:
9780070635159
3. N. Hingorani, L. Gyugyi, Understanding FACTS: Concepts and Technology of
Flexible AC transmission Systems, Delhi Publishers, ISBN-13: 9788186308790
4. HVDC Transmission: S Kamakshaiah, V Kamaraju , McGrawHill, ISBN:
9780071072533

Commissioning of Electrical Equipment

GUJARAT TECHNOLOGICAL UNIVERSITY
ELECTRICAL ENGINEERING
B. E. SEMESTER: VII
Subject Name: Commissioning of Electrical Equipment
Subject Code: 170903

1. Transformer
Testing procedure for HV testing ,Phase shifting/ phase group , Radio
interference, Ratio Test , Load loss ,Separate source voltage testing ,Induced
voltage testing , Impulse & Surge testing , Noise level & vibration testing , Short
circuit withstand test ,Tan Delta test , Core insulation voltage test , Measurement
of impedance ,Testing of auxiliaries & safety device , Oil testing , Classification of
testing methods , Testing of bushing. DC & AC Resistance measurement,
Temp. Rise test, Short circuit test, Dielectric test, Partial discharge, Insulation
resistance testing. Polarity testing, Short time current rating, Impulse & surge
testing, Determination of error & accuracy class, Power frequency voltage
withstand test, over voltage inter-turn test.
Determination of polarization index for transformer.
Drying out procedure for transformer.
Commissioning steps for transformer
Purification & Filtration Procedure for Transformer oil.
Troubleshooting & Maintenance of transformer.
06
2. Induction Motor
Testing ( 3-phase & 1-phase)
Hammer test , Testing against variation of voltage/current/frequency, Load test,
NL & BR test , DC & AC Resistance measurement , Insulation measurement ,
Starting test , Temp. rise test , Slip measurement , HV test ,Testing on auxiliaries
06
, Vibration Test , Noise level test.
Drying out methods / Polarization Index / Hot Temperature measurement
Degree of protection (IP Grade)
Commissioning steps for Induction motor, Heat Run Test.
Commissioning of Induction Generator.
Troubleshooting & maintenance of induction motor
3. Sub station equipments :
Bus bar
Temp. Rise test, Rated short time current test, HV test, Power frequency voltage
withstand test, Impulse / surge testing, Vibration.
Earthing
Earthing resistance measurement, Substation grid Earthing, Soil resistivity
measurement.
Isolator Testing
Temp. Resistance test, Short circuit test, Charging current making & breaking
test, Inductive current making & breaking test.
06
4. Circuit breaker
Testing of HV/LV circuit breaker
No load Mechanical Operation , Mechanical endurance test , Temp. rise test
,Impulse & surge testing , short time current test . Short circuit making &
breaking test , Line Charging current making & breaking test ,Cable charging &
capacitor bank making & breaking test ,Out of phase switching ,Short line fault
test ,Electrical & Mechanical endurance test for LT switch gear like MCB/ MCCB/
ELCB etc.
C.T. & P.T. Testing , Relay testing , Coupling capacitors, Station Batteries
for D.C. Supply , Fire Shifting Equipments. Testing & Commissioning of
Lightning Arrestor, Substation Commissioning by Thermography.
Troubleshooting & maintenance of circuit breakers.
06
5. DC Machine
Testing
Voltage drop test or bar to bar test , Load test , Open circuit & magnetizing test
,Insulation resistance , Starting performance, Dielectric test. Swinburn’s test,
Hopkinson’s test, Field test, Separation of losses in DC shunt machine. Temp.
rise test & Heat run test
06
Term work:
Term work shall be based on above syllabus.
Reference Books:
1. Testing, Commissioning & maintenance of electrical equipment By S. S. Rao
2. The commissioning of Electrical Plant By RCH Richardson (Chapman & Hall)
Drying out process
Commissioning steps for DC machines
Troubleshooting & maintenance
6. Synchronous machine
Testing
OC & SC test ,Characteristics , Loss measurement, Temp. rise test , Over speed
test , HV testing , Insulation resistance wave form interference , DC & AC
Resistance of armature & field winding measurement , Dielectric testing on
armature & field winding , Mechanical balance , Magnetic balance , Current
balance , Phase sequence , Harmonic analysis , reactance & time constant ,
Speed torque current , Vibration & noise measurement , SC test , Synchronizing
circuit testing , Testing of voltage regulators , Excitation circuit testing ,Voltage
recovery test , Retardation test on load / no load .
Drying out procedure
Commissioning steps for synchronous machines
Troubleshooting & maintenance
06
7. Commissioning of transmission line & Cable.
Derating of cable capacity , HV test , AC & DC Resistance check , Insulation
resistance , Impedance measurement , Location finding technique for fault in
under ground cables ( Murray loop test & Warley loop test ) , Testing of open
circuit faults in cables . Line charging, loading & Dropping.
Disaster management - Post disaster commissioning of power system
component
e. g. generator,transmission line, Electrical machines and equipments.
06

Term work:
Term work shall be based on above syllabus.
Reference Books:
1. Testing, Commissioning & maintenance of electrical equipment By S. S. Rao

Electrical Machine Design – 1

GUJARAT TECHNOLOGICAL UNIVERSITY
ELECTRICAL ENGINEERING
B. E. SEMESTER: VII
Subject Name: Electrical Machine Design – 1
Subject Code: 170902
1. GENERAL ASPECTS
Insulating Materials & Classifications, heating of electrical machines , Cooling
of Transformer and rotating machines , Electrical and Magnetic Loading ,
output coefficient , factor affecting size of machines , selection of B av & ac ,
Duty cycle and equivalent ratings
5
2. DESIGN OF THREE PHASE TRANSFORMER:
Types of transformers, position of HV and LV windings, core and yoke crosssectional
area, importance of mitered joints., Different types of transformers
windings. Different methods for cooling of transformer, Different positions of
tapings. Output equation for 3 phase transformers, window space factor,
factors affecting window space factor. Relation between emf per turn and
transformer rating, factors affecting constant K, stacking factor, examples.
Selection of flux density and current density, Window dimensions, Yoke
dimensions and overall core dimension calculations, examples. Design of HV
and LV windings (No. of turns and area of cross section). Estimation of
operating characteristics. Primary and secondary winding resistance. Leakage
reactance calculation of only cylindrical coil with equal height, Leakage
reactance of unequal windings and heights, only formula. No load current
calculations for 3 phase transformers. Temperature rise of transformer, design
of tank with tubes, calculation of dimension of tank, examples. Optimum
design Design for minimum cost. Design for minimum loss. Variation of
output and losses in transformer with linear dimensions. Dry transformer, high
frequency transformer
12
Term Work:
• Design of three phase transformer
• Drawing sheet of three phase transformer
• Design of DC machines
• Drawing Sheet of DC machine components.
• Tutorial on General aspects and C.T. , P.T.
Text Book
1. A course in electrical machine Design – A. K. Sawhney
Reference Books:
1. Electrical Machine Design – R. K. Agrawal
2. Design of Electrical Machine- V. N. Mittle
3. DC MACHINE DESIGN
Introduction, output equation, mmf calculation Selection of Number of poles,
core length, armature diameter,Carter’s fringing curves, length of air gap,
examples on above topics costing
ARMATURE DESIGN
Choice of armature winding, armature conductor, number of armature slots,
slot dimensions, slot loading, design of armature core, Problems on above
topics, costing
DESIGN OF FIELD SYSTEMS
Pole design, design of field winding of shunt, series and compound machines,
examples Design of interpole, effects and minimization armature reaction
Design of commutator and brushes, Improvement in commutation
,Performance calculation & Design consideration for large machines, HV
machines and miniature DC motors
20
4. DESIGN OF CURRENT TRANSORMERS
Introduction, construction Design principles OF C.T & P.T. , winding design,
Behavior of transformer under normal and abnormal condition.
5
Term Work:
• Design of three phase transformer
• Drawing sheet of three phase transformer
• Design of DC machines
• Drawing Sheet of DC machine components.
• Tutorial on General aspects and C.T. , P.T.
Text Book
1. A course in electrical machine Design – A. K. Sawhney
Reference Books:
1. Electrical Machine Design – R. K. Agrawal
2. Design of Electrical Machine- V. N. Mittle

Industrial Instrumentation

GUJARAT TECHNOLOGICAL UNIVERSITY
ELECTRICAL ENGINEERING
B. E. SEMESTER: VII
Subject Name: Industrial Instrumentation
Subject Code: 170904

1. Transducers:
Introduction to instrumentation system, static and dynamic characteristics of an
instrumentation system, Principles and classification of transducers, Electrical
transducers, basic requirements of transducers
04
2. Strain Gauge and Strain Measurement:
Factors affecting strain measurements, Types of strain gauges, theory of
operation of resistive strain gauge, gauge factor, types of electrical strain gauges,
strain gauge materials, gauging techniques and other factors, strain gauge
circuits and temperature compensation, applications of strain gauges.
04
3. Displacement Measurement:
Resistive potentiometer (Linear, circular and helical), L.V.D.T., R.V.D.T. and their
characteristics, variable inductance and capacitance transducers, Piezo electrical
transducers-output equations and equivalent circuit, Hall effect devices and
Proximity sensors, Large displacement measurement using synchros and
resolvers, Shaft encoders.
04
4. Forces and Torque Measurement:
Load cells and their applications, various methods for torque measurement. Use
of torque wrenches
04
5. Pressure Measurement:
Mechanical devices like Diaphragm, Bellows, and Bourdon tube for pressure
measurement, Variable inductance and capacitance transducers, Piezo electric
transducers, L.V.D.T. for measurement of pressure, Low pressure and vacuum
pressure measurement using Pirani gauge, McLeod gauge, Ionization gauge,
Pressure gauge calibration.
04
Term work and minimum 10 Practicals shall be based on the above syllabus.
Text Books:-
1. Industrial Instrumentation & Control by S. K. Singh.TMH Publication
2. Electrical and Electronics Measurement and Instrumentation,
By A. K. Shawney, Dhanpatrai & sons publications.
Reference Books:-
1. Principles of Industrial Instrumentation, D Patranabis, 3rd edition, Mc Graw hill
2. Mechanical & Industrial Measurements by R. K. Jain, Khanna pub
3. Principles of Industrial Instrumentation and control systems by Chennakesava R
Alavala,Cengage publ
4. Industrial Instrumentation by Rangan, Sharma, Mani
5. Transducers and Instrumentation , Murthy
6. Instrumentation measurement and analysis, 3rd edition, By Nakra Chaudhari, Mc Graw
hill
7. Fundamental of Industrial Instrumentation By Alok Barua, wiley India
6. Flow Measurement:
Differential pressure meter like Orifice plate, Venturi tube, flow nozzle, Pitot tube,
Rotameter, Turbine flow meter, Electro magnetic flow meter, hot wire
anemometer, Ultrasonic flow meter.
04
7. Level Measurement:
Resistive, inductive and capacitive techniques for level measurement, Ultrasonic
and radiation methods, Air purge system (Bubbler method).
04
8. Temperature Measurement:
Resistance type temperature sensors – RTD & Thermister, Thermocouples &
Thermopiles, Different types of Pyrometers. Humidity measurement and Moisture
measurement techniques. infrared guns
04
9. Recorders:
X - Y, strip chart and circular type graphic recorders - indicating, recording and
controlling instruments, multichannel recorders. Introduction to digital recorder.
04
10. Digital Data Acquisition systems & control :
Use of signal conditioners, scanners, signal converters, recorders, display
devices, A/D & D/A circuits in digital data acquisition. Instrumentation systems.
Types of Instrumentation systems. Components of an analog Instrumentation
Data – Acquisition system. Multiplexing systems. Uses of Data Acquisition
systems. Use of Recorders in Digital systems. Digital Recording systems.
Modern Digital Data Acquisition system. Analog Multiplexed operation, operation
of sample Hold circuits.
06

Term work and minimum 10 Practicals shall be based on the above syllabus.
Text Books:-
1. Industrial Instrumentation & Control by S. K. Singh.TMH Publication
2. Electrical and Electronics Measurement and Instrumentation,
By A. K. Shawney, Dhanpatrai & sons publications.
Reference Books:-
1. Principles of Industrial Instrumentation, D Patranabis, 3rd edition, Mc Graw hill
2. Mechanical & Industrial Measurements by R. K. Jain, Khanna pub
3. Principles of Industrial Instrumentation and control systems by Chennakesava R
Alavala,Cengage publ
4. Industrial Instrumentation by Rangan, Sharma, Mani
5. Transducers and Instrumentation , Murthy
6. Instrumentation measurement and analysis, 3rd edition, By Nakra Chaudhari, Mc Graw
hill
7. Fundamental of Industrial Instrumentation By Alok Barua, wiley India